All link kits are made to order.
Lead Time 2 weeks or less
Pioneer In the Double Bend rear link
Features:
-Increased skid angle to 26⁰ for insane breakover and even more available ground clearance.
-More portal friendly shock mount locations.
-Included built in carrier bearing is fully adjustable left to right, pitch, and fwd and back via 2 mounting locations.
-relocated universal body post mount slots.
-3 WB options via 1 set of baseline links due to unique mount system, as well as bar angle adjustability.(see details)
-Rear links able tuck WAY up into the chassis due to the new carrier design, which results in better ground clearance even with the suspension extended.
-front upper link bar angle adjustable.
-compact is the overall theme, keep it light, keep it simple, and this rig will decimate most anything you put in front of it.
DETAILS
Includes:
-L&R RAILS
-L&R SLIDERS
-1X BLANK SKID
-1X ADJUSTABLE CARRIER BRACE
-1X CARRIER HOUSING
-2X 5X11X4 BEARINGS
-2X 70MM CHASSIS BRACE
-1X 50MM LOWER LINK BRACE
-2X 6MM LOWER LINK SPACERS
14pc kit
needed to complete:
-AXIAL SHAFT PN AXI31410 for carrier bearing. (For DIY guys a 5mm precision stainless rod(amazon) can be cut to 37mm and grind flats on each end, and secure with M3 set screws)
-SHOCKS 80mm +/- respectively for travel needs. No more than 90mm recomended. Dlux ultra shorts with or w/o offset caps, or shorts with offset caps are ideal. Traxxas PN 2660 big bores are a great comparable budget option as well.
-TRANS compact required. EXO, Dlux PORTAL or NOD2 and others alike recomended per the intended application. (Can amazon search LCG COMPACT TRANSMISSION) also
-MOTOR smaller is better. Recomend small/stubby out runner like holmes/3bros/Dlux and others alike,
-3x DRIVESHAFTS recomend Dlux or EXO "cut to length" in front for thier reduced shaft size for clearance and strength. Larger(normal) diameter plastic shafts can be used in rear no issue to save weight and money.
-ESC compact am32 of your choice recomended. DLUX,HOLMES HOBBIES ,3BROS etc.
-AXLES open choice. 20% or more total OD recomended. 30% is ideal.
-SERVO open choice.
-TEAM KNK ASSORTED M3 BUTTON HEAD HARDWARE KIT(will need 2x m3x35mm for front skid/lower link mount.
-10pack of 3mm 4mm or 5mm spacers(AMAZON) for shock spacing or any other place you may need them.
Be sure to join the POIZD RC CRAWLERS facebook group for inspiration and to ask questions. We have an awesome community of 2k members and climbing, and theyre ready to help anyone that needs it.
IG @POIZD_RC follow and tag us in you posts and reels!
And remember to #StayPOIZD